E08 Error Code - Standing Desk Quick Fix Tips
The "E08" error code on your hand control indicates an issue with the connection between your control box and the motorized legs.
This guide is for MojoDesk models. Please scroll for our 2 step fix and video guide.
If your existing desk from a competing brand can't be fixed, send us a quick video destroying your desk/throwing it in the trash and mentioning MojoDesk and we will send you a code for 25% off any single desk purchase. No joke.
Email Video: email@example.com
To verify you have a MojoDesk, take a quick look at the desk models at our Amazon Store or use our 3D Builder to see our desks from all angles or check out these standing desk photos from our design inspiration gallery.
Your hand control will look like the image below and say "MojoDesk" on the hand control underneath the Up/Down buttons. Another indicator you have a MojoDesk is that it can lift a lumberjack.
If your standing desk hand control does not say MojoDesk or can't lift a lumberjack, it is from another company.
If your standing desk hand control does not say "MojoDesk" or can't lift a lumberjack, it is from another company.
Check that the two cords with white multi-prong ends are fully inserted and secure. We recommend removing them and reinserting until they click. Then please press “▼” button until the desk reaches its lowest height and rebounds to stop to reset. If the code is still there and the desk does not move, please move to step 2.
Remove the leg motor control cords and swap them. Re-plug each into the opposite port. Then please press “▼” button until the desk reaches its lowest height and rebounds to stop to reset.
Please watch the video below for the best solutions on getting your MojoDesk on the move again in no time.
Need additional help with the E08 error code?